Samsung secret codes are special codes that can be used to access hidden features of Samsung smartphones. These codes are not meant to be used by the general public and are instead meant to be used by developers and technicians. Some of the features that can be accessed using Samsung secret codes include diagnostics information, the device’s firmware version, and the status of the phone’s battery. Additionally, some of these codes can be used to unlock the phone’s bootloader, which can then be used to install custom firmware or software on the device. Here is versace biggie sunglasses.
Whether you own a Samsung Galaxy S5, S6, S7, S8, S9, S10, S20, Note 4, Note 5, Note 9, Note 10, Note 20, Galaxy A, J, or M series phone or Galaxy Tab, secret codes are given below should apply to all devices. However, you should keep in mind that Samsung codes vary from device to device. Also, code that works on one version of the software may not work on another.
On many older Galaxy devices running TouchWiz, you can even use Samsung’s secret codes to unlock the SIM. I remember unlocking my AT&T Galaxy S5 using a secret hack. However, as soon as Samsung becomes aware of such hacks, it does not take long to update them with a new software update.
Content:
Samsung Secret Codes List [One UI]:
So if you have a Samsung device running in one UI, which means it was released in 2017 or later. then you can try the codes mentioned below, they should work fine. Using a secret code, serial number, and IMEI number you can even track the date of production and activation of your Samsung device.
![Samsung Secret Code List](https://gsmfixes.com/wp-content/uploads/2022/03/image-24.png)
Samsung Secret Code [One UI]: | Secret Code Function: |
---|---|
*#06# | Check the IMEI number any mobile phone or tablet |
*#0*# | Test RGB (Red Blue Green), Receiver, Vibration, Touch sensitivity, Speakers, Camera Sensors, S-Pen, Audio loopback, Software version, etc. |
*#0808# | Change USB settings. |
*#0228# | Check RSSI reading, Battery status ADC, etc. |
*#0011# | View the GSM status information. |
*#2222# | Check the Hardware Version |
*#1234# | View the details of the Software such as PDA, CSC, MODEM, etc. Helps you check the BL, AP, CP, and CSC of your Samsung device |
*#9090# | Check the diagnostic configuration |
*#9900# | Check the Dump mode |
*#12580*369# | Check Software and hardware information. This one also lets you check Samsung mobile manufacturing date. |
*#0283# | Check the Audio loopback control |
*#34971539# | Update Camera firmware |
#7465625*638*# | Check Network lock keycode |
*#2663# | Check TSP and TSK firmware update |
*#272IMEI#* | Check Product code |
*#272*IMEI# | Check buyer code, CSC (Country/Carrier Specific Product) Code |
*#0283# | Check Audio loopback control |
*#1111# | Check software version |
*#34971539# | View Camera firmware menu |
*43# [dial] | Enable call waiting |
#43#[dial] | Turn off call waiting |
*#43#[dial] | Show status of call waiting |
*135#[dial] | Request own phone number (doesn’t work sometimes) |
**04*[old Pin]*[new Pin]*[new Pin]# | Change device PIN. Replace the old and new PINs of your Samsung device. |
*#004*[number]# | Divert call to a given number. Replace “[number]” with a phone number |
*#004# | Request the status for call diversion |
#004# | Deactivate call diversion |
##004# | Erase call diversion |
List of Codes for Old TouchWiz Samsung Devices:
In case you find an old Samsung phone or tablet like Galaxy S4, S5, S6, S7, Note 4, Note 5, Note 6, Note 7, Galaxy J and Series C, etc. and works on TouchWiz or Android 6.0 or below. , you should try the codes described below.
Samsung Secret Code: | Secret Code Function: |
---|---|
*#0*# / *#*#0*# | Test RGB (Red Blue Green), Receiver, Vibration, Touch sensitivity, Speakers, Camera Sensors, S-Pen, Audio loopback, Software version, etc. |
*#06# | Show IMEI Number |
*#03# | NAND Flash the serial number |
*#80# | Touchscreen noise test (warning do not press power button) |
*#251# | Wakelock OFF |
*#251# | Wakelock ON |
*#526# | WLAN Engineering Mode |
*#528# | WLAN Engineering Mode |
*#745# | RIL Dump Menu |
*#746# | Debug Dump Menu |
*#0011# | Service Mode |
*#0228# | Battery status |
*#0283# | Audio packet loopback test |
*#0289# | Audio/speaker-test (Melody Test Mode) |
*#0514# | SysDump (System Dumps, logs, etc.) |
*#0588# | Proximity Sensor test |
*#0589# | Light Sensor Test Mode |
*#0673# | Audio/speaker-test (same as *#0289#) |
*#0782# | Real-time clock test |
*#0842# | Vibration test |
*#1575# | GPS Control Menu |
*#2263# | RF Band Selection |
*#2663# | Touchscreen FW and version |
*#2664# | HW touchscreen test |
*#3264# | RAM check (version number) |
*#7769# | Proximity sensor test |
*#7284# | Phone utility and USB driver and connectivity settings |
*#7353# | Performs 12 types of function tests |
*#7594# | Factory mode / Enable shutdown on long press |
*#8888# | Service Mode (Read FTA hardware version) |
*#9900# | System Dump Mode |
*#9999# | Software versions (AP, CP, CSC, FTA SW) |
*#2222# | Hardware version |
*#1234# | View SW Version PDA, CSC, MODEM |
*#0228# | Battery diagnostics |
*#9090# | Service Mode |
*#301279# | HSDPA/HSUPA Control Menu |
*#4238378# | GCF Configuration |
*#197328640#or*#*#197328640#*#* | Enabling test mode for service activity (also shows the manufacturing date of Samsung devices) |
*#232331# | Bluetooth test |
*#232337# | Bluetooth address |
*#232338# | WLAN MAC address & PS mode |
*#232339# | WLAN Engineering Mode test (TX & RX modes) (same as *#526*) |
*#8736364# | Opens OTA update menu |
*#7412365# | Camera firmware standard (Front/Rear camera firmware) |
*#7465625# | Personalization (lock status settings) |
*#22558463# | Reset Total Call Time |
*#12580*369# | Main Version (AP, CP, CSC, RF cal, HW revision) |
*#3282*727336*# | System and storage information, and Data usage statistics |
* 2767 *3855# | Wipes Samsung phone completely |
*#*#7780#*#* | Resets your phone to the factory state and deletes only apps and app data. You don’t need to boot into the Samsung recovery mode to do that. |
*#*#7594#*#* | Enables direct power off without showing Power Menu when you hold the Power button |
*#*#232338#*#* | Displays Wi-Fi MAC address |
*#*#4986*2650468#*#* | PDA, Phone, Hardware, RF Call Date (or manufacturing date) firmware info |
##778 [dial] | View the EPST menu |
So this was a long list of all the secret codes you can try and use on your Samsung Android devices, using the One UI or TouchWiz UI. All you have to do is open the dial system on your smartphone and dial the codes mentioned above. You can copy and save them or bookmark this URL in the future. These codes may come in handy when needed.
That, If you are still stuck in the process or do not understand anything related to this article, you can let us know in the comments section below.
All of the mentioned devices, logos and pictures and brands are the property of their owners. I used it here just to learn and identify brand models.
Hopefully, the above Samsung Secret Code will be useful to you. Stay with GsmFixes to get all the solutions of Android, Trick Tips, Bypass FRP, Flash Tool, Driver & ETC.